Renishaaw PH10M

Renishaaw PH10M

PH10 System Description (MSRP 21 885)A PH10 is an indexing probe holder which allows the probe to be orientated and locked in any of 720 positions during the inspection cycleRenishaw PH10M CMM Coordinate Measuring Machine Probe HeadThe PH10 range of motorised heads consists of three different models PH10T a shank-mounted head with two-wired probe capability and an M8 thread PH10M a shank-mounted head with multiwired probe capability and a Renishaw autojoint PH10MQ a quill-mounted head with multiwired probe capability and a Renishaw autojointEach head in the PH10 range is a general purpose versatile unit designed specifically for use on direct computer controlled (DCC) CMMs and incorporates the following features 720 indexing positions 0.4 m indexing repeatability 7.5 indexing steps in both axes 300 mm (maximum) extension bar capabilityPH10 specificationRepeatability of position (2 )PH10T < 0.4 m (0.00002 in) - equivalent to a TP20 and stylus (part number A-5000-3604) PH10M PH10MQ < 0.4 m (0.00002 in) - equivalent to a TP6A and stylus (part number A-5000-3553) Accuracy of step spacing from theoretical positionPH10T 0.24 mm ( 0.012in) (using TP6 probe and stylus part number A 5000-3553) PH10M PH10MQ 0.3 mm ( 0.012 in) (using TP6A probe and stylus part number A 5000-3553)PositioningStep 7.5 A axis 0 to 105 15 positions B axis -180 to 180 48 positions Total 720 positionsProbe mountingPH10T M8 thread 18 mm diameter bush face PH10M PH10MQ Multiwired autojointDimensions from quill faceXY - All 62mm Z - PH10T 102mm Z - PH10M 117mm Z - PH10MQ 73mmWeightPH10T 595g PH10M 620g PH10MQ 730gSystem operating temperature10 C to 40 C (50 F to 104 F)System operating temperature-10 C to 70 C (14 F to 158 F)