Singer 328 Sewing Machine Instruction Manual

Singer 328 Sewing Machine Instruction Manual. You can find this manual here Examples include Threading your machine. Bobbin winding. Removing and replacing bobbin case. Inserting needle. Stitch length regulator. Adjusting thread tension. Pressure adjustments. Using fashion disks. Zigzag stitching. Fabric needle thread chart. Using feet and attachments. Machine Lubrication. Much more Great diagrams Model Style-O-Matic.77 page instruction manual. Singer 328 Sewing Machine Instruction Manual Removing the bobbinOpen slide plate and lift out bobbin. Winding the bobbinLoosen stop motion screw with right hand. Place empty bobbin on spindle. Press bobbin winder down against hand wheel. Place spool of thread on spool pin. Thread between tension discs and through bobbin as shown. Hold end of thread and start machine. (End of thread will break off after a few coils have been wound on the bobbin.) When Bobbin it is full Stop Machine. Lift bobbin winder away from hand wheel and remove bobbin. Tighten stop motion screw. If thread doesn t wind evenlyLoosen screw which holds bobbin winder tension bracket to machine bed. Move bracket to left if bobbin winds high on the right. Move to right if bobbin winds high on the left. Tighten tension bracket screw. Threading the bobbin caseHold bobbin so that thread leads off and direction shown. Place bobbin in case. Lead thread into slot and under spring. Draw thread into notch at the end of spring pull about 3 inches of thread across bobbin. Close slide plate. Stitch length regulatorNumerals on left side of indicator represent number of stitches per inch. Numerals on right side represent stitch length in millimeters. Upper incline area of the regulator represent stitch length above 20. Lower inclined area of the regulator allows the stitch setting to be locked in place when stitching folds pleats or multiple layers of heavy fabric.To set Stitch lengthRelease pointer by turning thumb nut to the left. Position lever for desired Stitch length. Tighten pointer against plate by turning thumb not to the right. What s the pointer has been positioned reverse stitching is accomplished by raising a lever to its highest point. The locked position must be unlocked for reverse stitching. We also carry the service manual for this machine here. More sewing machine manuals are available here-s manualsoncd.com We are a family run business serving the sewing community for over 10 years.Have fun sewing Let us know if you need a manual for your machine.

Share:

Important!

There are a lot of advertisers on Advertigo. We cannot check them one by one.

You work hard for your money and you want a company you can rely on when you are buying or selling things. That’s why we want to help you protect yourself from fraud. In this section, you’ll find informative tips and other useful material to stay informed and help reduce your chances of falling victim to scammers.

Please understand that Advertigo.net is a free service to help buyers and sellers (and etc.) find one another. Advertigo.net is not involved in any transactions and can not police the actions of our many users.