Automatic Aerosol Filling Machine (Weifang)

Automatic Aerosol Filling Machine

This automatic aerosol filling line mainly consists of unscrambler filling device capping device conveyor. Conveyor Stainless steel main panel and side panels 2440mm 3 sections plate in 2mm thickness made of 304 stainless steel. Filling Device Equipped with an air blowing head and 3 filling heads fully-pneumatic control and each head can be controlled separately a set of 65mm aerosol can holder and can guidance panel are provided main pneumatic control devices are introduced from Italy and Japan. It is featured as no material is discharged in absence of aerosol can. 304 stainless steel. Injecting and Capping device provided with a vacuum head a capping head 3 injecting heads. It features guiding devices are provided at both capping heads and injecting heads. 304 stainless steel. Control System The main body including the aerosol filler and the capping and injecting device is under pneumatic control. With high efficiency safe simple and reliable operation and easy maintenance. scope of speed 4.5-23r min 0.75kw anti-blast motor and anti-blast switch are attached. Safety Guarantee Anti-blast motors are applied for tin unscrambler device and the conveyor the circuit is through PVC pipes and anti-blast junction boxes connected by anti-blast switch the main body is absent from power supply the casing is grounding to prevent electrostatic both aerosol filler and injecting device are protected by cabinet (stainless steel frame with 4mm transparent organic glass) to prevent injury due to can blasting. Parameter Production Capacity 30-50 tins minute Main drive motor Power 0.75KW Electric control box and heat pipe type Blast proof type Air Pressure 0.3-0.6MPa Maximum air consumption 0.6m3 min Applicable Tin Dia 35-65mm Applicable Tin Ht 80-330mm Accuracy Item Parameter Filling Accuracy 1% Air Filling Capacity 50-750ml www.vrjfillers.com chinamarket.chinesecms.com