Topdresser Tow Behind Commercial (Www.contractorsstore.com, )

Topdresser Tow Behind Commercial

Free Shipping 239-357-1853 Craig. Model GT-100 Topdresser Tow-Type. Drive 13 HP Honda engine.Hopper Capacity 28 Cubic feet (.792 cubic Meters)Hopper Dimensions Top 40 x 75 (1.13 x 2.12 meters).Bottom 20 x 50 (.508 x 1.27 meters)Box Construction 11 Gauge welded steel.Standard Controls Independent conveyor and spinner shut off.Metering Gate Full manual adjustment up to 7 (.177 meters)Spinners Standard Dual 18 inch 6 Paddle Tilting.Spinners Optional Dual 23 inch 6 Paddle Fixed.Spreading Application Up to 30 (9.14 meters) Heavy to Light.Conveyor Belt 20 (.508 meters) wide self tracking groove and covered lace belt.Optional Controls electric over hydraulic.Topdressing Speed Up to 9 mph (14.4 kph) depending on conditions.Empty Weight 990 lbs. (449 Kg)Loading Height 53 (1.346 meters)Tire Size 26.5 x 14-12 NHS turf tires.Hitch Heavy-duty SWIVEL pin hitch. Precision- Control is key and with Pequea Turf you have the ability to make infinite adjustments to spread pattern depth and speed providing the most accurate and efficient spreading for heavy or light topdressing. The GT-100 from Pequea Turf has been tailor made for golf course management professionals. Fully adjustable gates conveyor and spinners create precise spread depth and pattern. The GT Series are built with the same integrity and quality as our larger topdressers the SuperSpread Series. All of our topdressers are designed to save superintendents time and labor costs. CONTROL VALVES Two valves adjust the speed of the floor belt and the spinners. You adjust the valves before you topdress and then use your control box to start and stop material as you approach the area on which you want to spread. GATE Our 0-7 inches adjustable gate is easy to operate even under load with our innovative side access design. FLOOR Industry first Pequea Turf has designed one of the most innovative floor systems in the turf industry. We utilize a high quality covered lace belt with a 7 8 tracking strip down the center. In addition we use a complete roller floor system which allows the belt to run smoothly for years with very little maintenance. CONTROL BOX Standard controls include electric start independent belt and spinners and hour meter. The control box is constructed of stainless steel with a water resistant seal for longer life. SPINNERS Two 18 spinners with six paddles each spread material evenly. Spinners tilt up and down 15 degrees for heavy or light spreading. Payment can be made over the phone via Visa MasterCard American Express or Discover by calling 239-357-1853 Craig.